On-board computer and displays, Menus and submenus – Mercedes-Benz 2012 A Class User Manual

Page 224

Advertising
background image

qualified specialist workshop, e.g. a
Mercedes-Benz Service Centre.

Switching Adaptive Highbeam Assist on/

off
This function is only available on vehicles with
the Intelligent Light System.

X

Press the = or ; button on the steer-
ing wheel to select the

Settings

menu.

X

Press the : or 9 button to select the

Lights

submenu.

X

Press a to confirm.

X

Press the : or 9 button to select the

Adapt. main beam

function.

If the

Adapt. main beam

function has

been switched on, the cone of light and the
_ symbol in the multifunction display
are shown in orange.

X

Press the a button to save the setting.

For further information about Adaptive High-
beam Assist, see (

Y

page 110).

Setting the brightness of the ambient

lighting

X

Press the = or ; button on the steer-
ing wheel to select the

Settings

menu.

X

Press the : or 9 button to select the

Lights

submenu.

X

Press a to confirm.

X

Press the : or 9 button to select the

Amb. light +/-

function.

You will see the selected setting.

X

Press a to confirm.

X

Press the : or 9 button to adjust the
brightness to any level from

Off

to

Level

5

(bright).

X

Press the a or % button to save the
setting.

Activating/deactivating the surround

lighting and exterior lighting delayed

switch-off
If you have activated the

Surround light‐

ing

function and the light switch is set to

Ã, the following functions are activated
when it is dark:

R

surround lighting: the exterior lighting

remains lit for 40 seconds after unlocking
with the key. If you start the engine, the
surround lighting is switched off and auto-
matic headlamp mode is activated
(

Y

page 105).

R

exterior lighting delayed switch-off: the

exterior lighting remains lit for
60 seconds after the engine is switched off.
If you close all the doors and the tailgate,
the exterior lighting goes off after
15 seconds.

X

Press the = or ; button on the steer-
ing wheel to select the

Settings

menu.

X

Press the : or 9 button to select the

Lights

submenu.

X

Press a to confirm.

X

Press the : or 9 button to select the

Surround lighting

function.

When the

Surround lighting

function is

activated, the light cone and the area
around the vehicle are displayed in orange
in the multifunction display.

X

Press the a button to save the setting.

Deactivating delayed switch-off of the exte-
rior lighting temporarily:

X

Before leaving the vehicle, turn the key to
position

0 in the ignition lock.

X

Turn the key to position

2 in the ignition

lock.
The exterior lighting delayed switch-off is
deactivated.

Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.

i

Depending on your vehicle's equipment,

when the surround lighting and delayed
switch-off exterior lighting are on, the fol-
lowing light up:

R

side lamps

R

foglamps

222

Menus and submenus

On-board computer and displays

Advertising