Engine oil, Technical data, Service products and capacities – Mercedes-Benz 2012 A Class User Manual

Page 345

Advertising
background image

Engine oil

General notes

When handling engine oil, observe the impor-
tant safety notes on service products
(

Y

page 338).

The quality of the engine oil is decisive for the
function and service life of an engine. After
extensive tests, Mercedes-Benz approves
engine oils that correspond to the current
technical standard.
Therefore, only Mercedes-Benz approved
engine oils may be used in Mercedes-Benz
engines.
Further information on tested and approved
engine oils can be obtained from any
Mercedes-Benz Service Centre. Mercedes-
Benz recommends that you have the oil
change carried out at a qualified specialist
workshop.
Mercedes-Benz approval is indicated on the
oil container by the inscription "MB Approval"
and the corresponding designation, e.g. MB
Approval 229.51.
You can call up an overview of approved
engine oils on the Internet at
http://bevo.mercedes-benz.com by enter-
ing the designation, e.g. 229.5.
The table shows which engine oils have been
approved for your vehicle.
Missing values were not available at the time
of going to print.

Petrol engines

MB Approval

All models

229.5

Diesel engines with a

diesel particle filter

MB Approval

A 180 CDI BlueEFFI-

CIENCY, manual trans-

mission

A 180 CDI BlueEFFI-

CIENCY, automatic

transmission
A 200 CDI BlueEFFI-

CIENCY
A 220 CDI BlueEFFI-

CIENCY

228.51,

229.31, 229.51

Diesel engines without

a diesel particle filter

MB Approval

A 180 CDI BlueEFFI-

CIENCY, manual trans-

mission

A 180 CDI BlueEFFI-

CIENCY, automatic

transmission
A 200 CDI BlueEFFI-

CIENCY
A 220 CDI BlueEFFI-

CIENCY

228.3, 228.5,

228.51, 229.3,
229.31, 229.5,

229.51

i

If the engine oils listed in the table are not

available, you may add the following engine
oils until the next oil change:

R

vehicles with a petrol engine: MB
Approval 229.1 or ACEA A3

R

vehicles with a diesel engine: MB
Approval 229.1, 229.3, 229.5 or
ACEA C3

This may only be added once and the
amount must not be greater than 1.0 l.

Capacities

The following values refer to an oil change,
including the oil filter.

Service products and capacities

343

Technical data

Z

Advertising