Wheels and tyres, Wheel and tyre combinations – Mercedes-Benz 2012 A Class User Manual

Page 332

Advertising
background image

!

Large wheels: the lower the section width

for a certain wheel size, the lower the ride
comfort is on poor road surfaces. Roll com-
fort and suspension comfort are reduced
and the risk of damage to the wheels and
tyres as a result of driving over obstacles
increases.

Overview of abbreviations used in the follow-
ing tyre tables:

R

BA: both axles

R

FA: front axle

R

RA: rear axle

You will find a table with recommended tyre
pressures for various operating conditions on
the inside of your vehicle's fuel filler flap. For
further information on tyre pressure, see
(

Y

page 321). Check tyre pressures regularly

and only when the tyres are cold.
Notes on the vehicle equipment – always fit
the vehicle:

R

with tyres of the same size on a given axle
(left/right)

R

with the same type of tyres at a given time
(summer tyres, winter tyres, MOExtended
tyres)
Exception: it is permissible to fit a different
type or make in the event of a flat tyre.
Observe the "MOExtended tyres (tyres with
run-flat characteristics)" section
(

Y

page 300).

Vehicles with MOExtended tyres are not
equipped with a TIREFIT kit at the factory. It
is therefore recommended that you addition-
ally equip your vehicle with a TIREFIT kit if you
fit tyres that do not feature run-flat charac-
teristics, e.g. winter tyres. A TIREFIT kit can
be obtained from a qualified specialist work-
shop.

In the following table, the wheel/tyre combi-
nations are allocated to the vehicle models
through variants, e.g. V1, V2 etc.:

V1 A 180

12

V2 A 180 CDI

12

V3 A 200

12

, A 220 CDI

12

V4 A 200 CDI

12

V5 A 250

12

V6 A 250 Sport

V7 A 45 AMG 4MATIC

i

Not all wheel/tyre combinations can be

fitted at the factory in all countries.

12

BlueEFFICIENCY

330

Wheel and tyre combinations

Wheels and tyres

Advertising