Audio control buttons – Subaru 2009 Tribeca User Manual

Page 205

Advertising
background image

! How to unload CDs from the player
! Ejecting a CD from the player
Of the discs loaded, you can select and
remove only one disc.
1. Use the disc select button (9) to select
the disc to be ejected.
2. Briefly press the

“ ” button (8). The

selected disc will be ejected. The disc
number indicator will flash at this time.
When you remove the ejected disc, the
disc number indicator will turn off.

To remove more discs in succession,
repeat Steps 1 and 2.

! Ejecting all discs from the player (all

disc ejection mode)

1. If you continue to press the

“ ” button

(8), the player will produce beep sound
and will enter the all disc ejection mode.
2. Remove the disc that has been
ejected. The other discs loaded will then
be ejected one after another. If you do not
remove the disc that has been ejected, the

“All disc ejection mode” will be canceled.

NOTE

. Avoid driving the vehicle with a CD
sticking out, because vibration might
make it fall out.

. If you press the “ ” button while

the player is in all disc ejection mode,
the mode will be cancelled following
ejection of the disc that is currently
being ejected.

. If you press the “CD” button while
the player is in all disc ejection mode,
the player will draw in the discs that
have been ejected and play them.

Audio control buttons

These buttons are located on the spokes
of the steering wheel. They allow the
driver to control audio functions without
taking his/her hands off the steering
wheel.

& MODE button

This button is used to select the desired
audio mode. Each time it is pressed, the
mode changes to the next one in the
following sequence:

*1: The frequency last received in the selected

Audio

5-27

– CONTINUED –

Advertising
This manual is related to the following products: