Vehicle dynamics control system – Subaru 2009 Tribeca User Manual

Page 259

Advertising
background image

system may not be working
properly. If the light remains
illuminated, have the brakes in-
spected by a SUBARU dealer
immediately.

. If at all in doubt about whether

the brakes are operating prop-
erly, do not drive the vehicle.
Have your vehicle towed to the
nearest SUBARU dealer for re-
pair.

Vehicle Dynamics Control
system

WARNING

Always use the utmost care in
driving

– overconfidence because

you are driving with a Vehicle Dy-
namics Control system equipped
vehicle could easily lead to a ser-
ious accident.

CAUTION

. Even if your vehicle is equipped

with Vehicle Dynamics Control,
winter tires or snow chains
should be used when driving on
snow-covered or icy roads; in
addition, vehicle speed should
be reduced considerably. Simply
having a Vehicle Dynamics Con-
trol system does not guarantee
that the vehicle will be able to
avoid accidents in any situation.

. Activation of the Vehicle Dy-

namics Control system is an
indication that the road being
travelled on has a slippery sur-
face; since having Vehicle Dy-
namics Control is no guarantee

that full vehicle control will be
maintained at all times and under
all conditions, its activation
should be seen as a sign that
the speed of the vehicle should
be reduced considerably.

. Whenever suspension compo-

nents, steering components, or
an axle are removed from a
vehicle equipped with Vehicle
Dynamics Control, have an
authorized SUBARU dealer per-
form an inspection of that sys-
tem.

. The following precautions should

be observed in order to ensure
that the Vehicle Dynamics Con-
trol system is operating properly:
– All four wheels should be

fitted with tires of the same
size, type, and brand. Further-
more, the amount of wear
should be the same for all
four tires.

– Keep the tire pressure at the

proper level as shown on the
vehicle placard attached to
the driver

’s side door pillar.

In the event of wheelspin and/or skidding
on a slippery road surface and/or during

Starting and operating

7-23

– CONTINUED –

Advertising
This manual is related to the following products: