How to use the nissan controller -5 – NISSAN 2009 Pathfinder User Manual

Page 171

Advertising
background image

CAUTION

The glass screen on the liquid crystal

display may break if it is hit with a hard

or sharp object. If the glass breaks, do

not touch the liquid crystalline material,

which contains a small amount of mer-

cury. In case of contact with skin, wash

immediately with soap and water.

To clean the display, never use a rough

cloth, alcohol, benzine, thinner or any

kind of solvent or paper towel with a

chemical cleaning agent. They will

scratch or deteriorate the panel.

Do not splash any liquid such as water

or car fragrance on the display. Contact

with liquid will cause the system to

malfunction.

When you use this system, make sure the engine

is running.
If you use the system with the engine not

running (ignition switch in the ON or ACC

position) for a long time, it will discharge

the battery, and the engine will not start.

Reference symbols:
ENTER button — This is a button on the control

panel.
“Display” key — This is a select key on the screen.

By selecting this key you can proceed to the next

function.

HOW TO USE THE NISSAN

CONTROLLER

Use the NISSAN controller to choose an item on

the display screen. Select an item on the display

using the main directional buttons

2

or the

center dial

3

. Then press the ENTER button

1

to select the item or perform the action.
The BACK button

4

has two functions:

● Go back to the previous display (cancel).

WHA0883

Monitor, climate, audio, phone and voice recognition systems

4-5

REVIEW COPY—

2009 Pathfinder (pat)

Owners Manual—USA_English (nna)
05/29/08—debbie

Advertising
This manual is related to the following products: