Changing engine oil filter -12 – NISSAN 2009 Pathfinder User Manual

Page 396

Advertising
background image

CHANGING ENGINE OIL FILTER

1. Park the vehicle on a level surface and apply

the parking brake.

2. Turn the engine off.
3. Place a large drain pan under the oil filter.
4. Unscrew the plate covering the oil filter ex-

posing the filter.

5. Loosen the oil filter

A

with an oil filter

wrench by turning it counterclockwise. Then

remove the oil filter by turning it by hand.

CAUTION

Be careful not to burn yourself. The engine

oil may be hot.

6. Wipe the engine oil filter sealing surface with

a clean rag.

CAUTION

Be sure to remove any old gasket material

remaining on the sealing surface of the

engine. Failure to do so could lead to

engine damage.

7. Coat the gasket on the new filter with clean

engine oil.

8. Screw on the oil filter until a slight resistance

is felt, then tighten an additional 2/3 turn.

9. Start the engine and check for leakage

around the oil filter. Correct as required.

10. Turn the engine off and wait more than 10

minutes. Check the oil level. Add engine oil if

necessary.

VQ40DE

WDI0502

VK56DE

WDI0505

8-12

Maintenance and do-it-yourself

REVIEW COPY—

2009 Pathfinder (pat)

Owners Manual—USA_English (nna)
05/29/08—debbie

Advertising
This manual is related to the following products: