Windshield wiper blades -21, Cleaning -21 – NISSAN 2009 Pathfinder User Manual

Page 405

Advertising
background image

2. Lift upward on the retainer to release the

filter cover and remove the filter cover.

NOTE:

The filters are marked with air flow arrows.
The end of the filter with the arrow should
face the rear of the vehicle. The arrows
should face downward.

3. Insert the first filter into the housing and slide

it over to the right. Insert the second filter

into the housing.

4. Reinstall the filter cover.
5. Install the glove box door.
6. Fill out the date information on the small

replacement label and attach it to the glove

box lid.

CLEANING

If your windshield is not clear after using the

windshield washer or if a wiper blade chatters

when running, wax or other material may be on

the blade or windshield.
Clean the outside of the windshield with a washer

solution or a mild detergent. Your windshield is

clean if beads do not form when rinsing with clear

water.
Clean each blade by wiping it with a cloth soaked

in a washer solution or a mild detergent. Then

rinse the blades with clear water. If your wind-

shield is still not clear after cleaning the blades

and using the wiper, replace the blades.

CAUTION

Worn windshield wiper blades can dam-

age the windshield and impair driver

vision.

LDI0678

LDI0679

WINDSHIELD WIPER BLADES

Maintenance and do-it-yourself

8-21

REVIEW COPY—

2009 Pathfinder (pat)

Owners Manual—USA_English (nna)
05/29/08—debbie

Advertising
This manual is related to the following products: