Keyfob battery replacement -24 – NISSAN 2008 Titan User Manual

Page 330

Advertising
background image

CAUTION

Be careful not to allow children to swallow

the battery and removed parts.

Replace the battery in the keyfob as follows:

1

Open the lid using a coin

A

.

2

Remove the battery

B

.

3

Install a new battery

C

with the “+” facing

down.

Recommended battery: CR2025 or equivalent.

4

Close the lid securely.

5. Press the

button, then the

button two or three times to check the key-

fob operation.

If the battery is removed for any reason
other than replacement, perform step 5.

An improperly disposed battery can

hurt the environment. Always confirm
local regulations for battery disposal.

The keyfob is water-resistant; how-

ever, if it does get wet, immediately
wipe completely dry.

The operational range of the keyfob

extends to approximately 33 ft (10 m)
from the vehicle. This range may vary
with conditions.

FCC Notice:
Changes or modifications not expressly ap-
proved by the party responsible for compli-
ance could void the user’s authority to op-
erate the equipment.

LDI0484

KEYFOB BATTERY REPLACEMENT

8-24

Maintenance and do-it-yourself

REVIEW COPY—

2008 Titan (tzw)

Owners Manual—USA_English (nna)
10/12/07—debbie

Advertising