NISSAN 2008 Titan - Manual (Page 53)

If you must install a child restraint in the front
center bench seat, follow these steps:
᭺
1 Position the child restraint on the front pas-
senger bench seat as illustrated. It should
be placed in a front-facing direction
only. Move the seat to the rearmost
position. Adjust the head restraint to its
highest position. Always follow the child re-
straint manufacturer’s instructions. Child
restraints for infants must be used in
the rear-facing direction and therefore
must not be used in the front seat.
The back of the child restraint should be
secured against the vehicle seat back. If
necessary, adjust or remove the head re-
straint to obtain the correct child restraint fit.
See “Head restraint adjustment” earlier in
this section. If the head restraint is removed,
store it in a secure place. Be sure to install
the head restraint when the child restraint is
removed. If the seating position does not
have an adjustable head restraint and it is
interfering with the proper child restraint fit,
try another seating position or a different
child restraint.
᭺
2 Route the seat belt tongue through the child
restraint and insert it into the buckle until you
hear and feel the latch engage.
Be sure to follow the child restraint manu-
facturer’s instructions for belt routing.
Front Facing — step 1
LRS0603
Front Facing — step 2
LRS0604
Safety—Seats, seat belts and supplemental restraint system 1-37
੬
REVIEW COPY— 2008 Titan (tzw)
Owners Manual—USA_English (nna)
10/11/07—debbie
੭