MIPRO act707s-ii(2ce149)b - Manual (Page 10)

ACT SINGLE CHANNEL WIRELESS RECEIVER
③
④
⑤
This interface system adapts parallel connection. Therefore, it takes only 2
linking wires to complete the connection to t he converter of the whole system.
This system can c onnect up to 64 receiver for simultaneous operation.
Though longer the distance is, worse the stability will be; nevertheless, the
network c onnecting cable c an still operate while it is 300 meters long.
However, it is our recommendation to keep the cable under 100 meters long
to ensure high-speed transmission.
8. CAUTIONS
1. When using DC power supply, please be aware of the operating voltage.
First of all, please make sure minimum of 12 volts can be obtained for
function properly. However, the power supply should not exceed its
maximum capacity of 15 volts. When the supply voltage is more than 15
volts, the system will suffer severe internal damage. It is preferred the
power source is from a regulated power with the minimum current of 1 A.
2. Use only MIPRO standard antenna to ensure the sensitivity of the
receiver.
3. Antenna socket has 8-volts DC power supply; please do not short the
circuit of this part.
1 6 17
NOTE﹕