Dell 5400+ - Manual (Page 22)

AXIS 5400+/AXIS 5600+ User’s Guide
22
3.4 Install Printers in Mac OS X
This section describes setting up your AXIS 5400+/AXIS 5600+ for printing in the Macintosh
environment (Mac OS X).
Note:
1. Start Print Center (from Go | Applications | Utilities | Print Center)
2. Select Printers | Add Printer...
3. From the Printer List dialog, select AppleTalk.
4. Now, the port (or ports) of your AXIS 5400+/AXIS 5600+ will appear in the list of available
printers. Each port is shown as <host name>_<port>.
Example: AXIS181cf0_LPT1
Select the print server port you want to use.
5. Select an appropriate printer driver for your printer from the Printer Model drop-down list. If
it is not available in the list, select Generic. You can also browse for a printer driver on your
computer or network by selecting Other... from the list.
6. Click Add to complete the installation.
If you need additional instructions, please refer to the AXIS 5400+/AXIS 5600+ User’s Manual
on www.axis.com
Proceed to Print Server Management and Configuration on page 23 for information on supported
management and configuration tools.
For installation on an older Mac OS, refer to the User’s Manual on www.axis.com
English