Dell 5400+ User Manual
Page 4
AXIS 5400+/AXIS 5600+ User’s Guide
4
Before You Start
This guide applies to the AXIS 5400+/AXIS 5600+ with firmware version
6.43 and higher.
The following operating systems are covered in this guide:
•
Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP, Windows Server
2003
•
Mac OS X
•
UNIX/Linux
Note:
The instructions in this guide are based on the settings found in a
new and unconfigured AXIS
5400+/AXIS 5600+.
To reload the default parameters, you can perform a Factory Default, which will restore most
settings to their default values. See Using the Test Button on page 26 for instructions.
Installation instructions in this book cover the above operating systems over TCP/IP.
See the
AXIS 5400+/AXIS 5600+ User’s Manual, located on www.axis.com for installation instructions
regarding
•
Windows over NetBIOS/NetBEUI
•
NetWare over IPX/SPX and TCP/IP
•
MacOS over Appletalk
English