5 scan transponder, 4 scan transponder – AXING SKQ 2-01 User Manual

Page 11

Advertising

Programming

SKQ 2-01

Page 11

If the device is adjusted manually, 1 is
assigned to the left channel strip and 2 is
assigned to the right channel strip.

This allows the TV set to accurately identify the
divided programs of a transponder during the
channel search.

Select menu item "TSId output" and press OK
to confirm.

To set the Id, press the VOL / VOL keys.

Assign 1 to the left channel strip and 2 to the
right channel strip.

4.5.5 Scan Transponder

Select menu item "Scan Transponder" by
pressing the OK-button. All previous done
settigs will be stored.

Fig. 17

Scan Transponder

There are two possibilities of starting the scan
of a transponder.

1. Manual entry

2. Menu item "Select Program Info"

Manual setting
You can find the transponder data in lists or
special websites (e. g. http://www.lyngsat.com/
europe.html )

Set the Frequency with the VOL / VOL
keys.

Or by means of the numerical keypad of the
remote control.

Set the Symbol Rate with the VOL / VOL
keys.

Or by means of the numerical keypad of the
remote control.

The correct symbol rate will be found
automatically in the AUTO position.

Generally, leave the Sat ID basic setting set to
A; it must be changed only if various satellite
positions are available. Up to 4 satellite
positions can be selected.

Low LNB Frequency, High LNB Frequency
Band, other oscillator frequencies can be
selected here but the basic settings are correct
for al common LNBs and must not be changed.

Scan After entering the frequency and the
polarization, start by pressing the OK key.

Fig. 18

Display scan transponder

After "Please wait", "Scan transponder" and
"Transponder data found" appears "User
settings saved" and the channel list is opened
(see 4.6 Channel list on page 12.).

Select Program Info
Alternatively, channels can be selected from a
preset satellite list via the menu item "Select
Program Info".

Select menu item “Select Program Info” and
confirm with OK. A list showing all available
channels with the corresponding pre-
programmed data appears.

Fig. 19

List of available channels

When selecting the channels, make sure that
also the selected SAT position is available. On
A are pre-programmed the Astra programs
and on B the Hotbird programs. The last
column gives information about if the channel
is freely receivable (FTA) or if it is an encoded
channel (CA) that only can be received via a
common access module.