7 creating and loading pump programs – Casella CEL Apex personal sampling pumps User Manual
Page 30
30
Date
The date of the sample or of the report can be entered,
Audited by
The data / report checker can be identified,
Date
The date of checking can be entered.
7.
Enter information into these dialogs as relevant to the particular sample folder or report.
8.
When all required additional information has been added to the sample folder, highlight the sample
folder, then right click.
9.
Use the Report
Report
Report
Report option. A dialog is displayed with four options.
Company Logo
Allows a bitmap image file to be selected to be printed in the top right corner of
reports.
Print
Prints a report based on data downloaded from the pump that includes
information entered via the Sample Properties dialog.
The layout of a Pump manager report is shown in Figure 12.
Print Preview
Displays a preview of the printed report.
Copy
Copies the report to the PC clipboard, so it can be pasted into a word processor
and customised.
The pasted report has minimal formatting and may require minor layout work
such as font sizes and tab setting.
6.7
Creating and Loading Pump Programs
All operations to create and load pump programs for the Apex Pro are controlled via the Pump Programs
dialog.
The following different types of programs are available.
Duration
(DUR) the pump samples for a fixed period and switches off automatically when finished,
TWA
`(Time weighted average) the pump samples for a fixed percentage of the run,
calculating the required ON/OFF cycle automatically,
Prog 1 / 2
(Pr1 / Pr2) samples to complex schedules created in Pump Manager.
The properties for all four programs can be edited then sent to the pump at the same time as follows.
1.
Select the Pump menu.
2.
Select the Program option.
The Pump Programs dialog will be displayed showing program
types: Duration, TWA, Prog 1 and Prog 2, plus the following option.
Send to Pump
This sends the complete package of four
programs to the pump.
3.
Select a pump program to edit.
This enables the Properties button.
4.
Click the Properties button.