Cos φ - pf (power factor) bar – CIRCUTOR CVM-C10 Series User Manual
Page 25
4.3.- DISPLAY
The unit has a backlit LCD display showing all the parameters listed in
Table 3
.
The display is divided into four areas (
):
Figure 14: CVM-C10 Display areas
The area with
data per phase displays the instantaneous, maximum and minimum
values of each phase being measured or calculated by the unit.
The
total data area displays the totals of the values being measured or calculated by
the unit.
Analogue bar, displays the % of the current power of the installation.
Cos
φ - PF Bar
, displays the value of the system's Cos
φ
or power factor in real time.
4�3�1� COS
φ - PF (POWER FACTOR) BAR
Figure 15: Cos φ - PF Bar
This bar displays the value of the installation's cos
φ
or power factor in real time.
The parameter that will be displayed is selected on the programming menu. (
the Cos φ - PF bar on the display”
)
25
Instruction Manual
CVM-C10