Harmonics – CIRCUTOR CVM-C10 Series User Manual
Page 34
4�5�3� USER
This profile is identified with the
user symbol on the bottom of the screen (
).
Figure 23: Screen of the CVM-C10 with the user profile.
This profile displays the screens selected in the programming menu (
).
4.6.-
HARMONICS
The unit can display the voltage and current harmonics, up to the 31st order harmonic, for each
one of the lines, L1, L2 and L3.
They must be activated in the programming menu to be displayed (
Press the
key on the last profile screen to show all operation profiles on the harmonics
display screens.
Harmonics are displayed as shown on
Figure 24: CVM-C10 Current harmonics screen�
Press key
to open the next harmonics screen.
Press key
to display the different types of harmonics:
• Voltage harmonics L1- L2 - L3
• Current harmonics L1- L2 -L3
34
CVM-C10
Instruction Manual