CIRCUTOR CVM-C10 Series - Manual (Page 31)

Figure 20: Analyzer profile screen displaying the minimum values.
 Maximum Demand
The unit calculates the maximum demand of the following:
• Current
• Three-Phase Active Power.
•Three-Phase Apparent Power.
This value can be displayed on the display screen of the parameter by pressing the
and keys at the same time.
The dem symbol appears on the display ( Figure 21 )
Figure 21: Analyzer profile screen displaying the maximum demand values.
Press keys or to stop displaying the maximum demand values.
The maximum demand values are reset on the programming menu:
“4.9.10. Deleting maximum demand”
4�5�2� e 3 PROFILE
This profile is identified with the e 3 symbol on the bottom of the screen ( Figure 22 ).
Figure 22: CVM-C10 screen with the e 3 profile.
31 Instruction Manual
CVM-C10