CIRCUTOR OPC Server PS/PSS - Manual (Page 12)

PS/PSS OPC Server -12-
‘Exit’: Ends program execution.
3.6.2.- OPC Server menu
OPC Server menu
‘Register’: This option is only available when the OPC server is inactive. Otherwise,
it will be deactivated. It registers the service and starts the PowerStudio OPC server so
that it becomes available to any OPC client. If the necessary dongle, or HASP key, is not
fitted, the application will show one of the following messages, informing you that the
server will be activated in demo mode:
1. If no dongle is inserted in the USB port:
Dongle not found message
2. If the dongle has been detected but does not contain a valid licence for the
PowerStudio OPC server:
Incorrect dongle message
While the OPC server is being activated, the following wait window is displayed:
Wait process window: activating OPC server