CIRCUTOR OPC Server PS/PSS - Manual (Page 9)

PS/PSS OPC Server -9-
way to do this is to directly click on the “Exit” button and the application will take care of
carrying out these tasks automatically, displaying the following messages:
1. Since you have not yet saved the new configuration, the program asks if you
want to save it before exiting:
Save changes ask message
2. Click “Yes” and enter a name for the newly created configuration:
Configuration name window
Click “OK”. Now the program will ask if you want to set this configuration as the
active one. Since this is the first configuration created, you should click “Yes” so that the
OPC server has a configuration and can start up.
Set as active configuration ask message
3. Finally, the program asks if you wish to activate the OPC server:
Activate OPC Server ask message