Delta Electronics Elevator Drive VFD-VL - Manual (Page 111)

Chapter 4 Parameters|
4-56 Revision Nov. 2008, VLE1, SW V1.03
Group 4 Multi-Step Speed Parameters
04-00 Zero Step Speed Frequency Unit: 0.01
04-01 1st Step Speed Frequency Unit: 0.01
04-02 2nd Step Speed Frequency Unit: 0.01
04-03 3rd Step Speed Frequency Unit: 0.01
04-04 4th Step Speed Frequency Unit: 0.01
04-05 5th Step Speed Frequency Unit: 0.01
04-06 6th Step Speed Frequency Unit: 0.01
04-07 7th Step Speed Frequency Unit: 0.01
04-08 8th Step Speed Frequency Unit: 0.01
04-09 9th Step Speed Frequency Unit: 0.01
04-10 10th Step Speed Frequency Unit: 0.01
04-11 11th Step Speed Frequency Unit: 0.01
04-12 12th Step Speed Frequency Unit: 0.01
04-13 13th Step Speed Frequency Unit: 0.01
04-14 14th Step Speed Frequency Unit: 0.01
04-15 15th Step Speed Frequency Unit: 0.01
Control
mode
VF VFPG SVC FOCPG FOCPM
Factory setting: 0.00
Settings 0.00 to 120.00 Hz
The Multi-Function Input Terminals (refer to Pr.02-01 to 02-08) are used to select one of the
AC motor drive Multi-step speeds. The speeds (frequencies) are determined by Pr.04-00 to
04-15 as shown above.