Doremi DCP-2000 - Manual (Page 4)

____________________________________________________________________________________
D2K.OM.002721.DRM Page 4 Version 1.1
Doremi Labs
1 Introduction
1.1 Purpose
This manual is intended to guide the user through the use of the DCP-2000 software application
Backup Manager. This program allows the user to back up and restore the following files on a
server:

Doremi: These files include configuration files, devices, SNMP threshold, audio, and
databases.

Identity: These files include Doremi SecurityModule identity certificates.

KDMs: These files include KDMs and DLMs.

Network: Includes IP addresses, DNS configurations, etc.

System: These files include system user accounts, group configurations, and timezone
information.
Note: The Backup Manager will generate an automatic backup of these files at every power up
and after every reboot to the local drive (e.g., RAID). Only the five latest configurations will be
saved on the local drive (RAID). From these five latest configurations, the most recent backup is
restored. The user can manually back up files to the local drive or external drive (e.g., e-SATA
or USB), or restore from an external drive at any time.
1.2 Software Version
This user manual is for use with software version 2.4.x and higher.
1.3 Contact Information
If in need of help or assistance, please contact Doremi Labs Technical Services:
USA
24/7 Technical Services line: + 1-866-484-4004
Technical Services Email:
[email protected]
Europe
24/7 Technical Services line: + 33 (0) 492-952-847
Technical Services Link:
http://support.doremitechno.org/ticketing
Japan
Technical Services line: + 044-966-4855
Technical Services Email:
[email protected]
Australia ~ China ~ India ~ Indonesia ~ Korea ~ Malaysia ~ New Zealand ~ Philippines ~
Singapore ~ Taiwan ~ Thailand
Technical Services Email:
[email protected]