4 showvault server set up – Doremi ShowVault / IMB User Manual
Page 13
Advertising
CRT.OM.001514.DRM
Page 13 Version1.7
Doremi Labs
4 ShowVault Server Set Up
Follow the steps below in order to setup the ShowVault server:
Connect one end of the Ethernet cable into the Show-Vault and the other end to the
Series 2 Projector.
Figure 12: Ethernet Cables
Connect one end of the PCI-Express cable into the ShowVault and the other end to
the IMB board on the Series 2 Projector as presented below:
Figure 13: PCI-Express Cables
Advertising