Doremi ShowVault / IMB - Manual (Page 20)

CRT.OM.001514.DRM Page 20 Version1.7
Doremi Labs
5 IMB Marriage Procedure
At this stage, the NEC Series-2 projector has to be configured with the IMB board. In order to
accomplish this step a Windows PC is required to be in the same network with the Digital
Cinema Communicator (DCC) software installed.
Important: The projector has to remain in Standby mode in order to change the
configuration.
Figure 23: NEC Projector Panel

Open the Digital Cinema Communicator (DCCs2) Software.
Figure 24: DCC Software Icon

The DCC Software will prompt you with the Communication Settings. Fill in the IP
address section with the projector's IP.