Doremi ShowVault / IMB - Manual (Page 15)

CRT.OM.001514.DRM Page 15 Version1.7
Doremi Labs
4.1 Audio and GPIO Installation
4.1.1 Audio CAT5 Cable Installation

Plug one CAT5 cable end into the top AES slot (RJ-45 connector) for audio channels 1-
8.

Plug the other end of the CAT5 cable in the audio processor.

Take another CAT5 cable end and plug it into the bottom AES slot (RJ-45 connector) for
audio channels 9-16.

Plug the other end of the CAT5 cable adapter in the audio processor.
4.1.2 GPIO CAT5 Cable Installation

Plug one CAT5 cable end from the GPI slot into whichever automation controller is
available or required.

Take another CAT5 cable and plug it from the GPO slot into whichever automation
controller is available or required.
4.1.3 Audio and GPIO Pin-Out Information
Figure 16: RJ45 Socket Pinout Example