Drylam Fujipla PLS3311 - Manual (Page 15)

AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3>
3．INSTALLATION
CAUTION
・
Read the safety instructions carefully regarding installation and about proper grounding on page 3.
・ When you install the Feeder Tray and Rear Exit Tray, avoid dropping them on your foot during the installation.
・ Should there be any problem during the installation, please contact your administrator, dealer or Dry Lam’s
Tech-Line.
3-1. INSTALLING THE PLS3311
Allow a space of about 60 cm around the machine for flawless operation. Always make sure that the
four level stoppers are securely set.
3-2. SET FEEDER TRAY
Attach the Extension Tray to the Feeder Tray as shown.
1 Attach the feeder tray assembly using both your hands.
Insert it on an angle shown in the illustration:
2 Fit the protruded parts of the machine into
the holes of the tray.
3 Attach the feeder guard according to the paper
length.