Drylam Fujipla PLS3311 - Manual (Page 53)

AL-MEISTER PLS3311 INSTRUCTION MANUAL <Rev.3>
the blade.
PROBLEM CHECK IF SOLUTION PAGE
● PICK ERROR The first sheet of paper is
partially fed into the machine. ・ Slide the paper back to the
magnetic stop on the Feeder
Tray.
・ Make the paper flush on
the tray.
21
・ Press [RESET] key.
More than two sheets are fed
into the machine. ・ Remove the paper. ・Hold
the stack of paper vertically
and tamp it down and fan the
paper well. ・If papers are
curling, make them flat.
・
Control the level of feeding
pressure by raising it upward
to resist multiple sheets.
・
Press [RESET] key.
47
Paper is not fed at right angle. ・Remove the papers.
・ Control the level of feeding
pressure. ・Fix the feeder
paper guide firmly in the right
position. ・Press [RESET] key.
21
47
The feeding roller is dirty. ・ Remove the papers.
・ Clean the feeding roller
with soft cloth.