DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 108)

Copyright © 2008 DynaScan Technology Corp. 108
Soft Watchdog Enable
It enables or disables the Watchdog software. When enabled, the Watchdog
software will monitor the operation of AP3 DSPlayer and if there is no
response from the DSPlayer for 5 minutes, Watchdog will reset the
Embedded IPC. By default, this is disabled.
Restore
It restores the settings to the previously saved state and aborts the changes
made.
Save and Restart
It saves all settings and restarts the AP3 DSPlayer. The new settings are
applied after the reboot.
※ NOTE: The value or name set in the network must be the same as the one on
the server for proper connection.