DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 57)

Copyright © 2008 DynaScan Technology Corp. 57
(overlapped) are highlighted with yellow.
Advance Setup of Play Item
Click “Advance” button in editing section to set up special parameters for a play
item. All modifications made in “Advance” will be applied to play items without
the need to press the “Modify” button. Continuous Play Items will switch to a
window similar to the AP3 preview player without options of play type and play
mode. After setup, click OK (complete setup) or Cancel (cancel setup) to
complete operation. Other parameters operate the same as preview player.
(Page.14)
Please refer to the chapter of Sequence for advance setup of Plugin Play Item
and Layout Play Item.
Additional Explanation
Can Play Item be interrupted?
Interruption will depend on the “Play All” (E) setting and “On-Time” (O) of the
play items. Play priority is set as: On-time Play may interrupt Play All (E),
which may interrupt normal Scheduled Play items. Therefore, the “Play All”
setting can reject interruption request form general Scheduled Play, and “On-
time” Play can interrupt “Play All” settings and normal Scheduled Play.
Scheduled play items do not have resume settings that Sequential Play has.
After interruption, restoration of the scheduled play is determined by selection
of Play All (E) setting. With Play All (E) selected, play will resume from
interrupted point and complete unfinished portion, prolonging the end time of