Future Automation PLS - Manual (Page 12)

In
st
al
la
ti
o
n
:
S
ta
ge
7
Page 11 of 22 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PLS - Plasma Lift and Swivel
By adjusting the bolts under each flap arm, it is possible
to alter the angle the flap opens to. It is very important
that when the flap is open, it rests in a vertical position,
as shown above.
Adjusting the Flap-Down Position