Future Automation PLS - Manual (Page 9)

In
st
all
at
io
n
: S
ta
ge
4
Page 8 of 22 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PLS - Plasma Lift and Swivel
Adjusting the Top Stop Position
By adjusting the white screw up or down, you can adjust
the stop height of the lifting beam and also, the base panel.
Once the height is set, you
will need to make the base
level by adjusting the strap
hanger at the other end of
the lift, shown to the left.
Adjustable Hanger
Non-Adjustable Hanger