Future Automation PLS - Manual (Page 15)

The IR sensor can be located anywhere outside of the cabinet.
It is very important that once the mechanism is set up, the lift is run up
and down a number of times to allow the straps to bed in and stabilise.
It may then be necessary to re-adjust the height and / or level of the lift-
ing beam, as first discussed in Stage 4 of these instructions.
Fix the IR Sensor and Run the Mechanism
In
st
all
at
io
n
: S
ta
ge
1
0
Page 14 of 22 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PLS - Plasma Lift and Swivel