ILUMINARC Ilumiline™ Inground Tri-12 IP - Manual (Page 11)

Installation
Ilumiline Inground IP Optic 25 Series User Manual Rev. 10 7
Installation Sleeve Setup
When setting up the installation sleeve
· Drain any water that may have entered the sleeve.
· Locate the installation sleeve above the normal drainage level so the product is
never under more than 1 m of water (IP67) during heavy rain.
· Make sure that the installation sleeve and the stainless steel collar are horizontal
and level with the ground surface. This helps distribute the load uniformly over
the product’s surface and avoid creating dangerous bumps.