ILUMINARC Ilumiline™ Inground Tri-12 IP - Manual (Page 15)

Installation
Ilumiline Inground IP Optic 25 Series User Manual Rev. 10 11
If you have not
configured the
DMX starting
address and
DMX mode for each
product, they will all use
their default values. This
means that all products
will operate in unison.
Controllers
Both Ilumiline Inground IP products can operate with a standard DMX controller or with the
Ilumicode. The following sections explain the controllers you can use with each product, as well
as how to connect these products to the corresponding controllers.
DMX Controller
The channel assignments depend on the chosen personality (see the corresponding
Menu Map section) and the DMX address assigned to each product (see
the Programming section).
The following figure illustrates how to connect the DMX controller to the Ilumiline
Inground IP products.