ILUMINARC Ilumiline™ Inground Tri-12 IP - Manual (Page 6)

Introduction
2 Ilumiline Inground IP Optic 25 Series User Manual Rev. 10
There are no user
serviceable parts
inside this
product. Any reference to
servicing you may find
from now on in this User
Manual will only apply to
properly certified
ILUMINARC
®
technicians. Do not open
the housing or attempt
any repairs unless you
are certified to do so.
Please refer to
all applicable
local codes and
regulations for the proper
installation of this product.
Keep this
manual for
future
consultation. If you sell
this product to another
user, make sure that they
also receive this manual.
In the unlikely
event that your
Ilumiline
Inground IP
product may require
service, please contact
ILUMINARC
® Technical
Support.
Safety Notes
Please read all the following safety notes carefully because they include important information
on how to install, use, and maintain this product safely.
Personal Safety
· Avoid direct eye exposure to the light source while the product is on.
· Always disconnect this product from its power source before servicing.
· Always connect this product to a grounded circuit to avoid the risk of electrocution.
· Do not touch this product’s housing when operating because it may be very hot.
Mounting and Installation
· This product is for outdoor use and can be submerged (IP67). However, do not
submerge deeper than 1 m for more than thirty (30) minutes.
· CAUTION: When transferring product from extreme temperature environments, (e.g.
cold truck to warm humid ballroom) condensation may form on the internal electronics
of the product. To avoid causing a failure, allow product to fully acclimate to the
surrounding environment before connecting it to power.
· Make sure there are no flammable materials close to this product while operating.
Power and Wiring
· Always make sure that you are connecting this product to the proper voltage, as per the
specifications in this manual or on the product’s sticker.
· Never connect this product to a dimmer pack.
· Make sure that the power input cable is not cracked, crimped, or damaged.
· Never disconnect this product by pulling or tugging on the power input cable.
Operation
· The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
· In case of a serious operating problem, stop using this product immediately!