Junger Audio D*AP4 FLX / D*AP4 LM Edition - Manual (Page 15)

D*AP4
10
Operating - menu structure of the X*AP RM 1 remote panel
Power up display – may show up to four D*AP4's enabled for remote control for this X*AP RM 1
remote panel. The example below has just one D*AP4 unit [given name "LM4"] attached for
remote control. The status is "connect" (i.e. you may connect with that device).
See X*AP RM1 manual for details.
Pressing that button will connect with the D*AP4.
Now the X*AP RM
1 remote panel will gather all necessary information from that D*AP4 unit
(this may take a few seconds). When finished the main operating display opens up:
From here you may fire pre-defined hotkeys and observe the loudness of the processed programs.
Because this is the main operating display, the <ESC> button lights
red to indicate that the
power up display is below the main operating display.
Pressing
<ESC> sends you back to the power up display (device selection).
Operating – menu structure of the X*AP RM 1 remote panel – operating displays
When you press the <MENU> button, the operating menu opens up:
When pressing the <ESC> button you will return to the main operating display.
Operating display – Audio Processor
<ESC> returns to the operating display.
MENU
ESC
Hotkey 1 Hotkey 2 Hotkey 3 Hotkey 4 Hotkey 5 Hotkey 6 Hotkey 7 Hotkey 8
Program 1 Program 2
-21.0
LUFS
-21.5
LUFS
EBU
S
out
MENU
ESC
Remote Panel select device to control
LM4
10.110.96.13
connect
MENU
ESC
Menu LM4 10.110.96.13
Audio
Processor
EBU R 128
Meter
MENU
ESC
Audio Processor LM4 10.110.96.13
Fail
Over
Input Spectral
Signature
Dynamics Voice
Over
Level
Magic
Output Equalizer