Junger Audio D*AP4 FLX / D*AP4 LM Edition - Manual (Page 71)

D*AP4
66
Setup GUI – EVENTS – Events – Measurement Events
The measurement event as part of an action can control the integrated measurement of the processed
programs:
For each measurement event you can assign one of the possible control functions.
Setup GUI – EVENTS – Events – I/O Events
At the moment I/O events are restricted to control the GPOs of the D*AP4:
Each GPO (when incorporated into that I/O event) can be
set to the behavior as follows:
Clear Turns a GPO off that was previously
turned on.
Set Turns a GPO on.
Follow The GPO follows the state of the trigger.
Toggle The trigger will toggle that GPO.
Be careful because it needs a definite
known starting condition to work properly.
To illustrate the function we have setup GPO 1 for that
"Alarm GPO" event (this is the one where the alarm bell
is connected).