Junger Audio D*AP LM2 / D*AP LM4 - Digital Audio Processor - Manual (Page 4)

Rev. 130705
D*AP LM 4
Hardware
• 1RU compact 19" processing device with front panel
• Front Panel displays 4ch LED bar graph, operating display, LED status display
• Front Panel buttons BYPASS, METER, 4x function control, SEL, MENU, ESC
• Rotary encoder predefined functions, context sensitive modes
• 4 channel audio DSP 2 Analog Devices® Sharc floating point processors
•
2 x AES3 and 2x AES3id on board with independent relay bypass and auto input selection
• 2 x SRC selectable per AES input
• External sync IN 75 Ω input (Word Clock, AES3id, Black Burst, Tri-Level)
• Sync OUT 75 Ω Word Clock output
• RJ45 network connector 100BaseT full duplex Ethernet interface
• USB "B" connector built in USB < > serial adapter to access the device service port
• 8 GPIs balanced inputs on 25pin Sub-D
• 8 GPOs relay change over contacts on 25pin Sub-D
• Aux power supply build in isolated 5 V supply for external GPI/O wiring
• Optional dual power supply load balanced, auto fail over
• One interface slot I/O expansion slot for option modules :
3G / HD / SD SDI module option module 3G SDI de-embedder / embedder with relay bypass
8Ch AES I/O module option module 4x AES3id I/Os with relay bypass
4Ch analog I/O module option module 4x analog line I/Os with relay bypass
8Ch analog out module option module 8x analog line out with relay protection
operating manual