Paxton Superchargers Dodge Durango User Manual
Page 9
2-3
P/N: 4809632
©2002 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
25SEP02 v1.0 Dodge Durango(4809632v1.0)
Fig. 2-10
m.
Remove the three bolts securing the A/C
compressor using a 13mm and 15mm sock-
et. Lift compressor up and let it rest on top
of the valve cover.
n.
Using a 1-1/8” wrench or socket, remove the
large bolt on the front of the cylinder head.
(See Fig. 2-11.)
Fig. 2-11
o.
Trim the plastic hose that connects to the oil
filler by cutting it off just before the second
barb (approx 3/4”). Do not remove the sec-
ond barb as this keeps the hose from coming
off under boost. (See Fig. 2-12.) Install the
supplied longer hose.
Fig. 2-12
p. Detach the cruise control cable at the throttle
body. (See Fig. 2-13.) Using a 10mm socket,
unbolt the cruise control actuator and seper-
ate it from its mounting bracket.
Fig. 2-13
Fig. 2-14
q. Once you have removed the two 10mm nuts
securing the cable to the actuator, pull out
the small pin using a pair of pliers. (See Fig.
2-14.)