TVLogic FCM-461W-S1 - Manual (Page 22)

FCM/LHM S
er
eis M
onit
or 22
8. How to set 'PRESET' (2) (FCM Only)
• You will be able to save formation of ‘PRESET’
from 1~20.
• Empty
- There is no information saved.
- You will only see ‘save’ as it is shown below.
- If you press ‘Enter’ key of the Remote
Controller Unit after you choose ‘Yes’, it
saves the setting.
• Occupied
- There is a information saved previously.
- You will be able to ‘save’ and ‘execute’ as it
is shown below.
- If you press ‘Enter’ key of the Remote
Controller Unit after you choose ‘Yes’, it
automatically choose ‘execute’, then press
‘Enter’ again to execute the previously set
information.
- If you press ‘Enter’ key of the Remote
Controller Unit after you choose ‘Yes’, it
goes to ‘save’ to change to the current
setting information, then ‘Enter’ again to
save the changed setting information.
[3] Save 'PRESET'