TVLogic FCM-461W-S1 - Manual (Page 8)

FCM/LHM S
er
eis M
onit
or 8
3. Controls & Functions
BUTTONS & INPUTS (FCM-461W)
SILK PRINT
PRODUCT - REAR
• RS232(DB-9)
- Input connector for FACTORY PGM allowing
for firmware updates.
• SDI(BNC) IN/OUT
- Input connection for HD/SD SDI.
• RS-422 IN/OUT (RJ-45)
- Input connection for RS-422.
• HDMI (HDMI) IN/OUT
- Input connection for HDMI.
• DVI (DVI-D) IN/OUT
- Input connection for DVI.
• VGA (DB-15) IN/OUT
- Input connection for Analog VGA.
• Component (BNC) IN/OUT
- Input connection for Component.
• S-VIDEO(BNC) IN/OUT
- Input connection for S-Video.
• Composite(BNC) IN/OUT
- Input connection for Composite.
• ~AC IN & S/W
- Used to supply AC power & Power On/Off.
• [STANDBY] button
- STANDBY On/Off.
• [LED] indicator
- Indicating monitors current status
- If the signal is normal, LED light is Green.
- If the power is off, LED light is Red.
- If No Video, LED light is Yellow.
• [ENTER/SOURCE] button
- Used to confirm a chosen value (or mode)
- when using OSD menu or direct mode
selection.
- Used to toggle the input modes
(DVI,HDMI,VGA).
• [UP] button
- Used to navigate the OSD menu.
• [DOWN] button
- Used to navigate the OSD menu. Also, used to
activate Auto Adjustment in VGA mode.
• [MENU] button
- Used to activate OSD menu.