TVLogic LEM-250C - Manual (Page 11)

FHD OLED Reference Monitor 11
3. Controls & Functions
REAR
Connector Composite Component S-Video
1 CVBS1 Y G Y
2 CVBS2 Pb B No Con.
3 CVBS3 Pr R C
●
[REMOTE] (RJ-45)
- Provides connection to control equipment
for external monitor control.
●
[DVI-I IN]
- Signal input terminal for DVI ANALOG or DVI
DIGITAL signal.
●
[CVBS1/Y/G/S-Y] (BNC)
- Signal input terminal used to feed the
monitor COMPOSITE 1, S-VIDEO Y,
COMPONENT Y and RGB G signals.
●
[CVSBS2/Pb/B] (BNC)
- Signal input terminal used to feed the
monitor COMPOSITE 2, RGB B and
COMPONENT Pb signals.
●
[CVSBS3/Pr/R/S-C] (BNC)
- Signal input terminal used to feed the
monitor COMPOSITE 3, S-VIDEO C,
COMPONENT Pr and RGB R signals.
●
[RS422 IN/OUT] (RJ-45)
- Used to control the monitor with protocol
provided by TVLogic or to support TSL
protocol.
●
[SDI-A IN] (BNC)
- HD/SD SDI signal input terminal for SDI A.
●
[SDI-A OUT] (BNC)
- HD/SD SDI signal output terminal for SDI A.
●
[SDI-B IN] (BNC)
- HD/SD SDI signal input terminal for SDI B.
●
[SDI-B OUT] (BNC)
- HD/SD SDI signal output terminal for SDI B.
●
[AUDIO IN] (Phone Jack)
- External Audio in for Stereo Speaker out.
- Select the left/right Audio disembedded
signal output.
- Used for HDMI input signal or external stereo
signal output through the internal speaker or
the phone jack.
●
[Ethernet & USB]
- Ethernet port for easy firmware updates and
remote control.
●
[AC IN]
- Used to supply AC power; 100V~240V input
range.
●
[VIDEO INPUT]
- Input VIDEO connection method.
<Warning!!>
When using the product make sure to ground,
whenever possible, before connecting the
input signal cable in order to prevent any
possible damage to the product or connected
devices. The damage may include signal noise,
malfunction of main board or display panel.
And the connected devices such as camera or
video source player may also be influenced
through signal cable. Please check if the AC
power source and the power extender or
power distributor is grounded.