Other functions, 6] firmware upgrade [7] color calibration, Select the page iii of [system] menu to activate – TVLogic LEM-250C User Manual
Page 37
FHD OLED Reference Monitor 37
6. Other Functions
[6] Firmware Upgrade
[7] COLOR CALIBRATION
●
The USB portable storage device (Thumb
drive) is needed for Firmware Upgrade.
●
Select the PAGE III of [SYSTEM] menu to
activate.
1. Connect the USB to the USB Slot on the front
of the monitor.
2. Set the [S/W UPGRADE] as [ON].
3. The [S/W UPGRADE START] activates when
the USB connection is completed.
●
The Probe(USB) is needed for Auto
Color Calibration.
●
Select the PAGE III of [SYSTEM] menu to
activate.
1. Connect the Color Probe to the USB Slot on
the front of the monitor.
A supported USB probe (K-10, i1Pro) is
needed for Auto Color Calibration
2. Set the [DEVICE] as the Color Probe which
will be connected.
3. Set the [Color Calibration] as [On].
4. Then the USB Color Probe is searched
automatically.
5. The [Color Calibration] activates when the
USB connection is completed.
4. Select the [S/W UPGRADE START] to start the
firmware update.
* While the Upgrade is conducting, the monitor
screen turns off and the monitor stops
functioning.
* When the Upgrade is completed, the monitor
reboots.
* The Upgrade process takes about 20~30
minutes according to the Firmware type.
6. Set the value of [TARGET LUMINANCE], [K-10
CHANNEL] and [COLORSPACE].
7. Select the [CALIBRATION START] to start the
calibration.
* After the calibration starts, various patterns
come on the screen and conduct the color
calibration.
* The Color Calibration takes about 20~60
minutes.
LEM-250C
LEM-250C
SDI A
SDI A
OFF
OFF
OFF
O ON
PAGE V >> PAGE VI
COPY DATA
CAL. LOG COPY START
S/W UPGRADE
S/W UPGRADE START
PAGE V >> PAGE VI
COPY DATA
CAL. LOG COPY START
S/W UPGRADE
S/W UPGRADE START
LEM-250C
SDI A
PAGE IV >> PAGE V
DEVICE
COLOR CALIBRATION
TARGET LUMINANCE
K-10 CHANNEL
COLORSPACE
CALIBRATION STARAT
MEASUREMENT START
Y:000.00 x:0.000 y:0.000
LEM-250C
SDI A
PAGE IV >> PAGE V
DEVICE
COLOR CALIBRATION
TARGET LUMINANCE
K-10 CHANNEL
COLORSPACE
CALIBRATION STARAT
MEASUREMENT START
Y:000.00 x:0.000 y:0.000
ON
OFF
80 cd/m2
00:
REC-709
ON
ON
80 cd/m2
00:
REC-709