TVLogic LEM-250C - Manual (Page 12)

12 FHD OLED Reference Monitor
●
You may control various functions using
MENU, UP/DOWN and ENTER buttons on
the bottom front of the monitor.
●
The product may be controlled and set
system-wise through OSD displayed on
the screen.
1. Press MENU button to activate the OSD
menu on the screen.
2. Move to a desired sub-menu with the UP/
DOWN button.
3. After selecting a sub-menu, press ENTER
button to select an item with UP/DOWN
button.
4. Press ENTER button to select the desired
item.
(The selected sub-menu will be highlighted.)
5. Press ENTER button to save the new value
after adjusting the value with UP/DOWN
button.
6. Press MENU button once to return to
previous menu and if there is no previous
menu, the OSD menu will be removed from
the screen.
7. To view next page in the sub menu, press
ENTER button at PAGE I >> PAGE II.
[1] Menu Tree
[2] Menu Control
[3] Menu Control Sequence
4. Menu Tree & Adjustment
LEM-250C SDI A
PAGE I >> PAGE II
BRIGHT
CONTRAST
CHROMA
PHASE
APERTURE
NTSC SETUP
VGA H POSITION
VGA V POSITION
0
0
0
0
0
7.5IRE
MIN
MIN