Zilog ZUSBOPTS - Manual (Page 89)

UM017105-0511 Menu Bar
Zilog Developer Studio II – ZNEO™
User Manual
61
Always Generate from Settings. When this button is selected, the linker command file is
generated afresh each time you build your project; the linker command file uses the proj-
ect settings that are in effect at the time. This button is selected by default, which is the
preferred setting for most users. Selecting this button means that all changes you make in
your project, such as adding more files to the project or changing project settings, are auto-
matically reflected in the linker command file that controls the final linking stage of the
build. If you do not want the linker command file generated each time your project builds,
select the
Use Existing button (see the Use Existing section on page 63).
Even though selecting Always Generate from Settings causes a new linker command file
to be generated when you build your project, any directives that you have specified in the
Additional Linker Directives dialog box are not erased or overridden.
Figure 53. (Commands Page of the Project Settings Dialog Box
Note: