Zilog ZAURA868 - Manual (Page 23)

ZAURA RF Module Shell
User Manual
UM023502-0911 filter
17
filter Set/Get address filter
Syntax
filter <setting>
Example 1
filter

Rx filter level 3
Example 2
filter 1

The filter command is used to display or modify the current setting of
the radio’s address filter. If the filter command is issued without any
parameters, the current filter value is displayed. If this command is issued
with a <setting> parameter, the radio’s receive filter is modified and the
new
filter setting is stored in Flash. The filter can include broadcast
packets (a filter value of 3) or exclude broadcast packets (a filter value of 1).