Adept T2 Pendant - Manual (Page 42)

Maintenance
42 Adept T2 Pendant User’s Guide, Rev D
1. Open the protective cover: 2. When the protective cover is open, you
can see the USB connector:
3. Insert the USB memory stick into the
USB connector:
4. Here is the USB memory stick installed
in the pendant:
1. Pull the USB memory stick from the
USB connector: 2. Push down on the protective cover until
it is fully seated:
Removing the USB Memory Stick
Installing the USB Memory Stick
NOTE: The USB memory stick will be detected and shown as a hard disk.