Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 29)

0x0002 -> 0x001F: reserved
0x0020 - 0x1FFE are valid PID assignments
Video PID
identifies video packets
0x0000: reserved for Program Association Table (PAT)
0x0001: reserved for conditional Access Table
0x0002 -> 0x001F: reserved
0x0020 - 0x1FFE are valid PID assignments
user-defined
20-character
hexadecimal *. ECMD VPI
see reserved
PIDs at left
Audio 1 PID
identifies packets containing audio AES stream
0x0000: reserved for Program Association Table (PAT)
0x0001: reserved for conditional Access Table
0x0002 -> 0x001F: reserved
0x0020 - 0x1FFE are valid PID assignments
user-defined
20-character
hexadecimal
*. ECMD API
[Index] [PID]
0 = channels
1,2
1= channels
3,4
see reserved
PIDs at left
Audio encryption2
PID
see above
user-defined
20-character
hexadecimal
See above
AMOL
Automated Measurement of Line Ups; identifies packet which
contains AMOL (NTSC) information
Only applies to 525 line (NTSC) video.
0x0020 - 0x1FFE are valid PID assignments
user-defined
20-character
hexadecimal
*.ECMD APQ
Splice
identifies packets which contain DVVS-255 splice information.
0x0010 - 0x1FFE are valid PID assignments
user-defined
20-character
hexadecimal
*.ECMD SPI
Note: As of firmware version 3.00.18, all PID API commands can now accept Hex or Decimal values.
PCR PID Examples: PRP 1E1 (set the PID to 0x1e1 (481 decimal) PRP , 481 (set the PID to 481 (the comma is an empty
placeholder) PRP 1E1 500 (set the PID to 500 (assumes 500 is different from the currently configured PID).
PID Ranges
Range Function
0x0000 Program Association Table
0x0001 Reserved for Conditional Access Table
0x0002->0x001F Reserved
0x0020 - 0x1FFE valid PID assignments
www.adtecdigital.com