Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual User Manual
Page 80
Multiplex Type: MPEG2 Transport Stream
Transport Steam composition:
1. The file should start with a transport sync byte (0x47) and should maintain packet alignment throughout the entire duration.
2. There should be a minimal amount of fill packets at the start of the file.
3. The first non-fill packet should be the PAT packet.
4. The next non-fill packet should be the PMT packet(s).
5. The next non-fill packet should be the first video stream packet.
The first video stream packet should contain the following
Adaptation indicator marking the presence of a PCR.
The adaptation flag field should have the discontinuity indicator set.
◊
♦
Valid PES header with PTS and DTS.
♦
Valid video sequence header and GOP header.
♦
•
6. Use the following recommended PID values:
PMT: 0x1e0 (480dec)
•
PCR: 0x1e1 (481dec, must reference video PID)
•
Video: 0x1e1 (481dec)
•
Audio1: 0x1e2 (482dec)
•
Audio2: 0x1e3 (483dec)
•
Audio
192Mbps AC-3 or MPEG Layer 2
•
HD Content
Resolution: High Profile up to 1280x720 (720p50 or 720p60. note that 1080i60 is not supported)
•
Bit Rate: 12Mbps constant bit rate (CBR).
•
SD Content
Resolution: Main Profile up to 720x480 NTSC or 720x576 PAL
•
Bit Rate: 5Mbps constant bit rate (CBR).
•
Note: Content should be padded with black frames front and back for improved visual transitions between clips.
www.adtecdigital.com