Adtec digital mediaHUB-HD Pro (version 03.07.19) Manual - Manual (Page 62)

Forward One Frame *.ECMD FAV 0 1
Fast Forward *.ECMD FFD
Reviewing Content
You can verify that a file is the one you want (or otherwise review the content) by entering the file name and clicking the
<Review> button. the file will play on the monitor configured for Confidence Decode.
RS422 Device
To export content from a non-linear editor to the mediaHUB-HD Pro for encoding, you will need to be connected to the control
computer via a special RS422 Device cable. See additional information on this cable.
When "RS422Device" is selected as the Controller Interface and <Next> is clicked, the Studio Control Tab will shift to this
configuration:
To Export from a Non-Linear Editor :
Step Action
1 On the Studio Tab, set the Controller Interface to 'RS422Device' and click <Apply>.
2 Enter the file name for the video spot.
3 Click the <Record>. The file will be stored on the mediaHub HD Pro at /media/hd0/media.
www.adtecdigital.com